The Next Generation of Cinema Processor

Download the brochure

Introduced in 2013, Ovation has changed the way technicians calibrate cinema sound over the sound paradigm of Time / Phase / Frequency. The Ovation2 retains all the significant benefits of its predecessor while introducing futuristic enhancements to push the boundaries of cinema sound once again.

We were offered a demonstration of the Trinnov Ovation and selected our most challenging theatre auditorium acoustically. The results were superb and truly made our theatre perform like never before. It felt so rich and immersive that we purchased our first system on the spot. We have since ordered eight more Trinnov Ovation processors to enhance our premium auditoriums.

Phoenix Theaters (USA)

Tactile Screens

We redesigned the front panel around 2 touch screens, offering cinema technicians and integrator much better ergonomic and a more modern user experience.

Re-designed power supply

At the heart of Ovation2, is a brand new power supply designed with the highest requirements in mind to offer better overall performance and stability in compliance with the world most demanding specs and certifications.

Step by step «Wizard»

A new step by step wizard is now available allowing for much broader configuration choices over an intuitive guided process. Connection to the Ovation has been improved with a web interface as well as the VNC client, no external software needed.

Digital & Analog Outputs

The new Ovation 16/16 version proposes up to 16 channels AES outputs mirroring its analog outputs. With this feature, you are now able to use an amplifier with digital inputs as well as analog inputs.

Trinnov Ovation2 Back Panel



Trinnov simplifies and improves the whole room equalization process. Our advanced loudspeaker/room optimization algorithms allow cinema installers to reach high-fidelity sound quality in record time. An achievement that they could only dream of a few years ago.

  • All audio boards designed and manufactured by Trinnov
  • A/D signal-to-noise ratio: 119 dBA, THD+N: -103 dB
  • D/A signal-to-noise ratio: 118 dBA, THD+N: -98 dB
  • Independent power supplies for audio and processing sections
  • Advanced jitter-rejection technologies
  • 64-bit floating point processing
  • 8 channels amplifiers/loudspeakers outputs (Analog OUT1, 1-8) via DB-25 connector (impedance<100 O, +24 dBu max)
  • Optional 2 more 8 channels ouputs available for bi-amp and tri-amp (Analog OUT2, 9-16, Analog OUT3, 17-24) via DB-25 connector (impedance <100Ω, +24 dBu max)
  • Hearing-impaired: 1 unbalanced output via RCA connector (H/I)
  • Visual Narration: 1 unbalanced output via RCA connector (VI)
  • Auxiliary: 2 unbalanced output via RCA connector (Aux1, Aux2)
  • Sampling rates: 44.1, 48, 96kHz
  • 8 channels AES DCI, expandable to 16 channels AES DCI via DB-25 connector (Dig IN 1)
  • 8 channels AES DCI, expandable to 16 channels AES DCI via RJ45 connector (Dig IN 2)
  • 2 x SPDIF via BNC connector (Dig IN 3, Dig IN 4)
  • 2 x SPDIF via RCA connector (Dig IN 5, Dig IN 6)
  • 1 x SPDIF TOSLINK (Dig IN 7)
  • 8 balanced inputs (ANALOG IN 1) via DB-25 (impedance >10 kO, +24 dBu max)
  • 8 balanced inputs (Calibration MICs) via 2 x RJ45
  • 2 balanced inputs (LINE L-R) via XLR for mixer set (impedance >10 kO, +18 dBu max)
  • 2 unbalanced inputs (Ana IN2) via RCA connector (impedance >10 kO, +12 dBu max)
  • 2 Balanced microphones input XLR connectors (MIC 1-2) with phantom power

Multiple options are supported for remote control and automation :

  • GPIO
  • Ethernet

Setup and configuration :

  • From any VNC client, through the network
  • Via a VGA monitor and a mouse
  • Processor: Intel i3
  • Data precision: 64 bits, floating point
  • RAM: 2Gb
  • Storage: Flash drive
  • Cooling system: Custom heat sinks + additional silent fans
  • Size / Dimensions 438mm x 430mm x 138.40mm
  • Weight: 11.30Kg