Amplitude8m

BRING THE IMMERSIVE EXPERIENCE TO YOUR HOME CINEMA

FAITHFULLY REPRODUCE ALL IMMERSIVE AUDIO FORMATS IN THEIR FULL GLORY

A perfect companion to our brand new Altitude¹⁶ and made with the most demanding users in mind, our new 8 channel amplifier brings intelligent power and pristine audio quality at a sensitive price point without any compromise in terms of design and build quality.

The Sound is simply Extraordinary: for me, there is no question that this Trinnov Processor is absolutely fantastic!

Golden Ear Technology (USA)

THE INDUSTRY’S LOWEST-DISTORTION AND NOISE SPECIFICATIONS_

The importance of this trait cannot be over-estimated in a theater that may have twenty or thirty speakers in a single room. If each of those speakers were producing even a small amount of noise, it would rapidly become noticeable and unacceptable. This scenario never arises with the Amplitude^8m.

INTELLIGENT POWER_

Our amplifiers use microprocessor control for turn-on delay and feature an automatic AC power recognition and configuration system. The amplifiers not only recognize whether they are hooked up to 117V or 230V nominal power, they automatically self-configure.

SLEEP CIRCUIT_

The Amplitude^8m incorporate a new “sleep” circuit. When the amplifier stays idle for a period of more than 10 minutes, power is removed from the output modules and a front-panel LED begins to flash. As soon as an input signal is detected again on any channel, normal playback operation resumes instantaneously.

SPECIFICATIONS

AUDIO SPECIFICATIONS

Crosstalk:
lower than -90dB.
Gain:
19dB – Test window is 18.6 to 19.6dB, center is 19.1dB.
Frequency response:
+0 , -0.5dB 20-20kHz
Power Output:
200 Watts RMS x 8 20-20kHz 0.05% THD+N 8Ω. 300W X4 into 4Ω.

INTELLIGENT POWER

Microprocessor:
control for turn-on delay
Automatic:
AC Voltage recognition and configuration
200 RMS/Channel:
@ 8Ω on 8 Ch and 300 RMS/Channel @ 4Ω on any 4 Ch
Hypex N-Core:
NC-500 Class D amplifier modules

PRISTINE DYNAMIC RENDERING

Intermodulation Distortion:
Less than 0.05%
Signal to noise ratio:
-120 dB referenced to rated output.
Frequency Response:
+0, -.5 dB, 5 Hz to 20kHz, load independent

POWER SPECIFICATIONS

Power Requirement:
min/max VAC / fuse: 117V AC (100V-132V) or 230V (200V-260V); 50/60 Hz Automatically selects proper voltage – 20 Amp fuse for 120V, 12.5 Amp fuse for 230V.
Power Consumption:
standby / idle /fully loaded: Less than 0.5W Standby. 80W Idle. 40W Sleep (no audio for 10 minutes). Full power (1kHz into 8ohms @ 200W) 2500VA, 2000W.

WEIGHT & DIMENSIONS

Weight: lbs / kg : 65 ½ – 29.8kg
Dimensions: 17” x 5 7/8” x 15 1/2” (432 mm x 150 mm x 394 mm)